Trade Rules - ikonPaper - Member of MOUSSA's Group

Go to content

Main menu:

Trade Rules

Tools


GENERAL TRADE RULES
FOR SALES OF PAPER AND PAPERBOARD



1. WEIGHT (MASS)
    
Unless otherwise stated, the word tonne or ton (also when abbreviated to) shall mean 1,000 kilograms.

2. QUANTITY: TOLERANCES

The delivered quantity is expressed in and based on weight, which is determined at the time when the goods are manufactured and packed.
For reels and for sheets packed in bulk the weight is determined gross and not-for reels wrappings, cores and plugs included and for sheets wrappings included. For paper in sheets counted and ream-wrapped, the weight is the nominal weight as defined in clause 5 (a).
The delivered quantity is decisive for the amount of money to be paid by the buyer and also for determining whether there is such deviation from the contracted quantity that the purchase shall not be considered to have been completed in accordance with the contract. The rights of the buyer always reserved, however, in accordance with clause 7, below. In the event of deviations in grammage or size, which exceed the tolerances stated in clauses 5 and 6.

3. QUANTITY: TOLERANCES

An order of paper or paperboard outside the normal stock range of the seller be deemed to have been fulfilled in accordance with the contract if the seller delivers to the buyer goods that do not deviate from the contract quantity by more than the tolerances stipulated below. Where a delivery comprises several lots as defined in clause 5 (a) each  lot shall be considered separately.

A. For the grammages up to and including 180 g/m2 (with the exception stated in C below)

Contracted quantity Permitted deviation

Under 1 ton  ± 15%
1 ton but under 5 tons ±  10%
5 tons but under 10 tons ±   7.5%
10 tons but under 100 tons ±   5%
100 tons and over ±   3%
For coloured qualities a further deviation of ± 2.5% is permitted.

B. For grammages  over 180 g/m2 (with the exception stated in C below)

Contracted quantity Permitted deviation

Under 5 tons ± 15%
5 tons but under 15 tons ± 10%
15 tons and over ±  5%
For coloured qualities a further deviation of ± 2.5% is permitted.

C. For the liner and fluting irrespective of grammage.

Contracted quantity Permitted deviation

Under 10 tons Special agreement must be reached
10 tons but under 20 tons ± 15%
20 tons but under 50 tons ± 10%
50 tons but under 100 tons ±   7.5%
100 tons and over ±   5%

In respect of A, B and C, the stated deviations shall be doubled downwards and upwards respectively where the buyer has stipulated for a maximum, or minimum weight without any margin for excess or shortage.

4. QUANTITY : CLAIMS


Claims arising from the seller delivering to the buyer a quantity of goods less or more than he contracted for must be notified by the buyer to the seller within seven (7) days of the buyer receiving any document stating or certifying the weight of the goods delivered.
In the event of any shortage deemed to have occurred in transit, the buyer shall on receipt of the goods, in the interests of the two contracting parties, duly notify the carrier.

5. QUALITY : GRAMMAGE TOLERANCES

(a) Interpretation of terms
Delivery means the total amount of goods covered by one contract and delivered at one time.

Lot means one or more units of paper or paperboard of a single kind and of specified characteristics, made by one and the same mill and delivered at one time.

Unit means a reel, bale, pallet, parcel or other transportation package.
Grammage means the weight in grams per square metre of paper or paperboard.

Ordered grammage means the grammage specified in the contract.

Actual grammage of a lot of paper or paperboard is the arithmetic mean of the grammage as determined by sampling and testing the lot according to SCAN-P 1:61and SCAN-P 6:75 respectively or such other SCAN methods, as may be adopted in their place. For newsprint, mechanical printings, magazine paper, liner & fluting the actual grammage, however, shall refer to the moisture content of these products at the time of manufacture.

Nominal weight for a delivery of sheets means the delivered number of sheets x their contracted area x the contracted grammage.

Tolerance with the respect to grammage means the allowed difference between ordered and actual grammage expressed in per cent of ordered grammage.

(b) Stipulations
A lot of paper or paperboard will be considered delivered correctly with regard to grammage when:
(1) the actual grammage in relation to the ordered grammage
Stays within the tolerances given below in tables A and B for paper and paperboard respectively and
(2) the best values for individual units in relation to the ordered grammage stay within the tolerances given below in the tables for one ton.

If a delivery comprises two or more lots, the actual grammage of each lot must be determined separately.

(c) Table A: Tolerances for different kinds of paper

Weight of lot, tons Printing and Writing papers, 35-80g/m2 Creped and Coated Papers  Other Paper qualities
% % %
1 (minimum)    ±  5.0    ±  9.0    ±  7.0
5 3.6 6.5 5.1
10 3.2 5.7 4.4
20 2.7 4.9 3.8
50 2.3 4.1 3.2
100 2.0 3.6 2.8
500 1.4 2.6 2.0
1,000 1.3 2.3 1.8
3,000 1.0 1.8 1.4

For lots of paper of intermediate magnitudes the tolerances are obtained by linear interpolation.

(d) Table B: Tolerances for different kinds of paperboard

Weight of lot, tons
Grammage ordered, g/m2
     < 450 450
% %
1ton but under 15 tons     ± 5.0     ± 8.0
15 tons but under 60 tons 4.0 5.5
60 tons and over 3.5 4.0

6. QUALITY : SIZE OF SHEETS AND WIDTH OF REELS, TOLERANCES


A delivery of paper or paperboard shall be deemed to have been completed in accordance with the contract if the delivered sizes (in case of sheets, the width and length and in the case of reels, the width) differs from the contracted sizes by no more than stipulated below:

Sheets
Not trimmed ± 0.4% not however, exceeding  ±  3 mm
Trimmed ± 0.2% not however, exceeding  ±  3 mm


Reels (with trimmed edge)
< 400 mm ± 2 mm
400 mm but < 2,000 mm ± 3 mm
2,000 mm and over ± 5 mm
Minimum 95% of the measurements must be within these tolerances.

7.QUALITY : CLAIMS


It shall be the responsibility of the buyer to check the quality
of delivered goods before their processing. If the quality is not in accordance with the quality contracted for or if the buyer has reason to believe that the quality  of the goods is such as to give rise to difficulties in processing, then the buyer shall not allow processing to commence unless he has received permission to do so from the seller in writing or by telecommunication.
If the buyer should discover a defect in the goods during processing, he shall immediately give notice of such defect by telecommunication to the seller.

A claim for a defect in quality that is of such a nature, that it
can be ascertained from the sellers documents or from a sample provided by the seller, must be made by the buyer within seven (7) days of receipt of the documents or the sample by the buyer.

Claims in respect of other defects of quality shall be made by the buyer:
Immediately , if the defect can be ascertained upon visual inspection of the goods or their packaging .

As soon as the defect is discovered, but at the latest within thirty, (30) days in the event of the defect relating to grammage, size, colour. Cleanness, strength or other reason that can be determined through  the taking of samples and

As soon as the defect is discovered, but at the latest within three (3) months in the event that it has not been possible  to find the defect through visual inspection or to determine it through taking of samples.

All periods of time shall be calculated from the time the goods are discharged, at the place of destination.

When giving notice of claim the buyer must identify the
goods clearly and state fully the facts on which his claim is based and he shall send to the seller, then or as soon as possible thereafter, any documents that support his claim. Until the dispute relating to the claim has been resolved, the buyer shall accept and carefully warehouse the goods and insure him for his interest and also for the interest of the seller to their full value including costs of transit and of warehousing and shall duly give notice of claim to the carrier within such period as may be provided by the contract of carriage should there be any evidence of damage in transit.

If the buyer has given notice of claim as required above and
the parties are unable to reach agreement on settlement of the claim, the dispute shall be referred to arbitration . At least ninety per cent (90%) of the goods in dispute shall be made available to the seller unused and not unduly tampered with so that samples may be taken for the purpose of the arbitration irrespective of demands made by the buyer. If the buyer has rejected the goods, any claim of his relating to the goods may be upheld only as long as the above-mentioned proportion of the goods remains unused and has not been tampered with.

If a delivered lot or part thereof is not within the appropriate
tolerance stated in clause 5 or 6, or is not reasonably comparable in quality to a sample provided by the seller or to the sellers specifications, the arbitrators may award rejection of the lot if all of it is faulty, or if only part of it is faulty they may award rejection of the part provided what remains can be used by the buyer. Rejection may not be awarded by the arbitrator for a faulty lot or part of a lot that is usable by the buyer for his normal business purposes despite the fault or defect. For such lots or parts of lots, the arbitrators shall award a reduction of the contract faulty lot or part instead of a reduction of the price.

(f) If the arbitrator’s order samples to be taken, samples shall be taken and tested in accordance with officially recognised standardised procedures. The seller shall have the right to be represented at the sampling.

(g) If in the case of two or more successive deliveries of the same type of paper or paperboard, the arbitrators give the buyer the right to cancel the contract fully or in part or award a reduction by twenty per cent (20%) or more of the invoice price, the buyer shall have the right to cancel the contract in respect of  undelivered quantities. If more than one type of paper or paperboard is covered by the contract, such right of cancellation shall apply to undelivered quantities of the type covered by the award.

8. DELAYED PAYMENT AND OWNERSHIP OF THE GOODS

(a) Failure by the buyer to pay for the goods within the time payment is due under the contract, shall entitle the seller to receive interest on the sum outstanding at the rate of 5 per cent
units above the bank rate or minimum lending rate officially or generally applied in the country of the buyer from time to time while such payment remains outstanding.
When the price is payable in a currency other than that of a
Seller’s country, the seller is also entitled to compensation if the rate of exchange is less favourable to him on the day of delayed payment than it was on the last day when payment was due.

(b) If the buyer is in default of payment and the delay is not attributable to errors by the transferring banks, the seller has the right to cancel the contract with effect fourteen (14) days after giving notice if the payment has still not reached him. In the case of instalment contracts such cancellation applies to the balance of the contract including or not including, as the seller so elects, the shipment for which the buyer is in default of payment.

(c) Delivered paper or paperboard shall-to the extent permitted by the law of the buyer’s country-remain the property of the seller until the whole sum payable under the contract is paid. The ownership of the paper or paperboard includes the right to the goods as delivered or converted and the right to the receivables and the money which the buyer may have acquired from disposing of the goods or products made thereof. Money so received in payment must be kept on a separate account by the buyer.

(d) Should the buyer be in default in making a payment due under the contract, the seller shall have the right upon giving notice tot he buyer in writing to withhold deliveries due to the buyer under the particular contract  and under all other contracts made between them until such payment is received by the seller.

Should the buyer or the seller become insolvent or go into
liquidation or have a receiver appointed or otherwise be found to be in such a financial position that it may be reasonably assumed that he will not be able to fulfil his obligations. The other party shall have the right to cancel the contract if the first party has not within ten (10) days after given notice furnished a satisfactory guarantee for his fulfilment of the contract.

LIMITATIONS OF DAMAGES

(a) If due to a defect of quality or delivery of a quantity less than the seller contracted to deliver, the seller accepts that the buyer rejects the goods delivered, or rejected is awarded by arbitrators, the seller shall without delay replace the defective goods or make good the short delivery, and the seller shall reimburse any additional expenses incurred by the buyer for handling, storing and insuring the defective goods but shall not otherwise be liable to the buyer for compensation or damages of any kind whatsoever because of the defect or short delivery.
Where there is a defect of quality that does not result in rejection of the goods, the buyer shall pay the reduced value of the faulty goods and shall not be entitled to recover other compensation or damages. Should a lack in quantity be acceptable to the buyer or constitute no real reason for rejection, payment shall be made only for the exact quantity delivered.
Where the seller has given an express warranty regarding specific properties of the goods for a particular purpose for which the goods has been bought, this purpose having been made known  to the seller by the buyer, the measure of damages for the breach of warranty shall be those provided by subclause (b) of this clause.


(b) When either party is liable for damages to the other, these shall not exceed the loss, which the party in fault could reasonably have foreseen at the time of conclusion of the contract nor include consequential damages. Damages shall in no case exceed the invoiced value of the delivery concerned.

(c) If one party alleges a breach of contract by the other party, he must take all necessary measures to mitigate the loss resulting from the breach, provided that and in as so far as he   

can do so without unreasonable inconvenience or cost. If he fails to take such measures the party in breach may claim a reduction in the damages.

9. GROUNDS OF DISCHARGE FROM LIABILITY (FORCE MAJEURE)

(a)The following shall be considered as grounds of discharge form liability  if they occur after the conclusion of the contract-or when they have occurred before that time, if their effects were not clearly foreseeable before the conclusion-and they prevent, hinder or delay the production in which the buyer  (or if the buyer is a wholesale dealer his customer provided named in the contract) intends to use the goods or the buyer’s acceptance of the goods or the seller’s production or delivery by agreed means, viz,:

War; war risk; Insurrection; Blockade; Requisition; embargo; calling up of personnel for military service; currency restrictions; export or import prohibitions or restrictions; restrictions in the use of power; labour conflicts; general shortage of labour; transport and materials; water shortage; fire; flood; storm; obstruction of railways; obstruction of navigation by ice at port of shipment; loss or detention at sea; non-delivery, faulty or delayed delivery by the seller’s suppliers of raw materials and other commodities for industrial production and any other circumstances beyond the control of the parties.

(b) The buyer or the seller, as the case may be, may suspend performance under this contract on the grounds of discharge from liability, neither party being responsible to the other party for any damage resulting from such suspension. Goods released by the seller and already manufactured or in the course of manufacture or in transit from the seller’s mills must however, always be accepted by the buyer.

(c) In the event of suspension of performance for less than ten (10) consecutive days, deliveries shall be resumed as soon as practicable for the full contract quantity. When such suspension shall have continued for a period of ten (10) consecutive days or more, the delivery or deliveries omitted during the period of suspension can be cancelled without liability to either party, and subsequent deliveries shall be resumed thereafter according to contract.

(e) The party wishing to claim relief by reason of any of the
said circumstances shall notify the other party in writing, by the telex or by cable without delay on the occurrence of the intervention and on the cessation thereof and as soon as practical, notify the other party to what extent the claim will necessitate a suspension.

10. INCREASED COSTS

Should there after the conclusion of the contract occur a substantial increase of not less than ten per cent (10%) of the total costs of the production and transportation of the goods, the seller shall have the price in respect of quantities due for delivery thirty (30) days, the seller may cancel the undelivered part of the contracted quantity.

11. CLAIMS

Al claims must be made in writing, by telex or by cable. Claims shall be made in thirty (30) days of the discharge of the goods at the place of destination except in clauses 4 and 7 above stated cases and claims for payment of the invoice. Non-approval of the invoice shall be made within ten (10) days of its receipt.
If the buyer does not observe the provisions and time limits stipulated in clauses 4 and 7 as well as above in this clause, the claim will not be affective against the seller and the buyer will lose all the right to compensation.
The buyer shall irrespective of whether he has lodged or is going to lodge claims, pay the invoice when due. Final adjustment shall be made when agreement is reached or the decision of the arbitrators is given.



13. DELIVERIES

Each delivery under this contract shall be considered as a separate contract and default on one or more deliveries shall not invalidate the balance of the contract except as herein otherwise provided. The present clause does not, however, affect the applicability of the clause 11 above.

14. SPECIAL PROVISIONS

These General Trade rules shall apply in their entirely unless otherwise expressly agreed upon in writing by the seller and the buyer.

15. APPLICABLE LAW

The contract and the legal regulations between the buyer and the seller shall be governed by the law of the country of the buyer shall apply.

16. ARBITRATION

All disputes in the connection with the present contract shall be finally settled under the rules of conciliation and arbitration of the international Chamber of Commerce by one or arbitrators appointed in accordance with the rules.

 
Back to content | Back to main menu